WikiPhone:Phone Access:Dial in via SIP: Difference between revisions
CaptainChris (talk | contribs) Created page with "You can access various public WikiPhone services on any SIP client, phone, or PBX (via trunk). This can done in the form of entering a "SIP URI" on your client. Please note that you cannot reach WikiPhone staff members or departments over public SIP. You will need to either use the PSTN or a collecters network. For each service, we provide both a alphabetic and numeric URI so that if your device does not allow the use of letters, you can still reach each service. Authent..." |
CaptainChris (talk | contribs) No edit summary |
||
| Line 21: | Line 21: | ||
|0201 | |0201 | ||
|} | |} | ||
== Available Codecs == | |||
Our system will accept the following codecs for SIP calls: | |||
* g711 ulaw | |||
* g711 alaw | |||
* g722 HD | |||
At this time, we do not support other codecs as these codecs are supported by nearly every SIP client; as such, we don't deem it necessary to test and support other codecs. | |||
== Softphone Clients == | |||
These are some softphone clients that let you dial SIP URIs without a SIP account and are commonly used. | |||
* MicroSIP | |||
** A commonly used SIP client that can be used to dial SIP URIs. | |||
** Before you can dial URIs without a SIP account, you will need to go to MicroSIP settings and check "Enable Local Account". | |||
** Written for Windows, can be used on Unix-like systems with WineHQ. | |||
== Configuring a trunk in CUCM == | == Configuring a trunk in CUCM == | ||
You can configure WikiPhone as a trunk in CUCM so that you can reach a WikiPhone service by dialing a DN on your phones. Since WikiPhone does not | You can configure WikiPhone as a trunk in CUCM so that you can reach a WikiPhone service by dialing a DN on your phones. Since WikiPhone does not require authentication or registration, this can be done without an external border element. | ||
To configure WikiPhone as a trunk, go to Device -> Trunk and choose SIP as the trunk type. Name the trunk WikiPhone. Set your device pool, and set the SIP Trunk Security Profile as "Non Secure SIP Trunk Profile". And set the SIP profile to "Standard SIP Profile". Set the Destination Address to "telephones.wiki" or if you don't have DNS, you can use our static IPv4 which is "135.148.32.154". And then save the trunk and click reset. | To configure WikiPhone as a trunk, go to Device -> Trunk and choose SIP as the trunk type. Name the trunk WikiPhone. Set your device pool, and set the SIP Trunk Security Profile as "Non Secure SIP Trunk Profile". And set the SIP profile to "Standard SIP Profile". Set the Destination Address to "telephones.wiki" or if you don't have DNS, you can use our static IPv4 which is "135.148.32.154". And then save the trunk and click reset. | ||