Cisco Unified Survivable Remote Site Telephony: Difference between revisions
CaptainChris (talk | contribs) No edit summary |
CaptainChris (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
== Configuration in CUCM == | == Configuration in CUCM == | ||
A system administrator can view, edit, and add SRST references in Cisco Unified CM Administration > System > SRST. By default, there is a "Disabled" reference, used in the default device pool out of the box, which does not specify an SRST server. And a "Use Default Gateway" reference. Used where the router on the network is running SRST. When adding a new reference, an IPv4 and IPv6 address can be added. If the SRST server is using alternate ports, a SIP port can be set in "SIP Port", and a SCCP port can be set in "Port". The SRST Certificate Provider port cannot be changed. The SRST reference is set in the Device Pool. When configuring a Device Pool, a SRST reference can be set in Roaming Sensitive Settings. All phones in the Device Pool can use that SRST server. | A system administrator can view, edit, and add SRST references in Cisco Unified CM Administration > System > SRST. By default, there is a "Disabled" reference, used in the default device pool out of the box, which does not specify an SRST server. And a "Use Default Gateway" reference. Used where the router on the network is running SRST. When adding a new reference, an IPv4 and IPv6 address can be added. If the SRST server is using alternate ports, a SIP port can be set in "SIP Port", and a SCCP port can be set in "Port". The SRST Certificate Provider port cannot be changed. The SRST reference is set in the Device Pool. When configuring a Device Pool, a SRST reference can be set in Roaming Sensitive Settings. All phones in the Device Pool can use that SRST server. | ||
<references /> | |||
[[Category:Cisco Systems]] | |||